Cutting Dia. 45mm Armored Cable ACSR Hydraulic Electrical Battery Cable Cutter
Product Introduction
HW is a battery powered tool, designed with hydraulic system, powerful motor, high-performance battery, scissors type cutting blades, pistol type tool body, intended to be used to cut Armoured Cu / Al Cables.
Features
1. All tools can be controlled by one key-press the trigger to start working, half loosing the trigger means
stop forcing pressure, loosing fully means piston return to the original position.
2. LCD Data Display-The Total Crimping Times, Electricity Power, Errors Info can be checked by the Display,
also we can special making for customer to show the pressure if necessary.
3. Air Cooling Heat dissipation system to extend using.
4. Heads Rotates 350 degree in order to gain better access to tight corners or other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self-discharge. Even after long periods of non
operation the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more
capacity and shorter charging cycles copare to NiMH batteries.
6. The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion
7. USD connect to memory crimping time
Product Parameter
| TECHNICAL DATA |
| Item No: | HL-45 |
| Crimping force: | 60KN |
| Stroke: | 50mm |
| Cutting cycle: | 130times |
| Cutting range: | dia 45mm(Cu/Al cable and armoured cable) |
| Voltage of battery: | 18V |
| Capacity: | 3.0Ah |
| Voltage: | 100-240V AC |
| Package: | Plastic box |
| ACCESSORIES |
| Blade: | 1pc |
| Battery: | 2pcs |
| Charger: | 1pc |
| sealing ring of cylinder: | 1set |
| sealing ring of safety valve: | 1set |
Product Tags:
|
|
Cutting Dia. 45mm Armored Cable ACSR Hydraulic Electrical Battery Cable Cutter Images
|
